Invisible fence d-fence 2002

3 year warranty Free transport Gift for free

Unrivaled system of Invisible Fence with BACKUP SOURCE !!! Thanks to the battery, this model guards your dog for up to 16 hours even in the event of a power failure !!! The model contains a black transmitter generator and the set is intended for installation up to 2200 m. The package contains 100 m of wire with a cross-section of 0.75 mm2, with the option to purchase additional antenna wire. More information

 In stock 
164.21 ex. VAT
21 %
By checking this box, you agree to (loan conditions)
In case of loss or damage during transport, we will send you new goods immediately.
36 months
Add to compare

Product configurator

Thanks to the electronic invisible fence, your dog will very quickly learn to respect the boundaries of the defined space and will move freely only in places where there is no danger.

Complete set for installation of 100m invisible fence.

UNRIVALED ADVANTAGE OF THIS MODEL: This model contains a BACKUP BATTERY, which will ensure safe operation of the device in the event of a power failure for up to 16 hours !!!!

The electronic invisible fence d-fence 2002 consists of a transmitter, receiver and antenna, which is a simple insulated wire. The transmitter generator generates a signal to the antenna wire, with which you delimit the selected area with a warning and correction zone. A receiver attached to the dog's collar senses a signal propagating from the installed antenna wire, if the dog crosses the boundary of the first (warning) band, the receiver will begin to emit an intermittent beep. If the dog does not respond to the audible warning and exceeds the limit of the second (correction) band, the receiver emits an audible signal and a correction pulse at the same time. The intensity of the stimulation pulse, as well as the width of the correction and warning zones, can be easily adjusted . The number of dogs with the receiver attached to the collar is not limited. The collar is compact and waterproof and due to its low weight and ergonomic design, it can be used for all breeds of dogs.

C ontents delivery:

  • 100 m of wire with a cross section of 0.75 mm
  • black transmission generator
  • woven belt receiver
  • 2 pcs of 12 mm contact points and 2 pcs of 17 mm
  • lithium battery CR2 3V
  • 9.6V backup battery
  • magnet with neck cord
  • power adapter
  • glow test
  • antenna connector
  • notch connectors for connecting wires 2 pcs
  • plastic dowels for fixing the transmitter generator to the wall 2 pcs
  • screws for fixing the transmitter generator to the wall 2 pcs
  • instructions and warranty card
  • instructional DVD
  • certificate for 3 years warranty

Example of installation of an invisible D-fence

The electronic systems of the generator and collar use modern technology based on single-chip microprocessors. The device is suitable for any type of terrain, it can be very easily installed using common tools. For the invisible fence system to work, the wire must be connected to the transmitter and form an unbroken loop of wire (avoid damaging it). From the transmitter, unwind the wire around the plot. The wire can be placed on the ground, shallowly buried (max. 10 cm deep) or attached to an existing fence or wall (in this case up to a height of 30 cm above the ground). The standard package includes 100 m of antenna wire. If you need more than 100 m, you can buy another package from us and then connect the wire with the help of notch connectors (2 notch connectors are part of the basic package). If you want the dog to be able to pass freely through a certain place on your property, through which you have to guide the wire, wind the outgoing wire around the incoming one, twisting the wires around each other causes the emitted waves and the dog can move freely through this place. The voltage in the antenna does not exceed 12 V, so there is no danger even if the wire is interrupted. For better orientation, it is possible to mark the defined area with targets.

The device has the option of setting the generator for short or long installation of the antenna wire.

d-fence 202/2002 - 2nd generation allows switching the power of the generator, which is generated into the antenna wire. This function allows fine adjustment of the warning and correction zone for short installations (up to 400 m of antenna wire) and at the same time for long installations (above 400 m of antenna wire). The newly purchased generator is pre-set at the factory for installation up to 400 m. If your installation is longer, the following settings need to be made.

Advantages of the invisible d-fence:

  • very easy and fast installation (fence can be functional within 1 hour)
  • cheap and very variable variant of fencing the land - if necessary, you can change the fencing in a moment according to current requirements (delimitation of the pool, flower beds, rock garden, entrance door to the house, etc.)
  • the fence is "invisible", ie. that it does not disturb the view of the surroundings, nor aesthetically disturb the garden, it can complement the existing fence, which the dog still overcomes (jumps, digs, bites)…)
  • you can keep any number of dogs in the designated area

Transmitting generator

  • 1st band (warning): infinitely adjustable from 0 to 15 meters (depending on the model and length of the antenna wire)
  • 2nd band (correction): continuously adjustable in the range of 0 to 15 meters (depending on the model and length of the antenna wire)
  • wire: low impedance copper insulated 0.75 to 2.5 mm 2 , length max. 2200 meters
  • power supply: adapter 230 V / 50 Hz, 15 V / 300 mA
  • limited area: maximum 30 ha (for square installation)
  • dimensions 156 x 116 x 35 mm (L x W x H)
  • The 9.6V backup battery, which serves as a backup source in the event of a mains power failure, is able to supply voltage to the transmitting generator for up to 16 hours.


  • dimensions: 34 x 43 x 64 mm
  • weight: 60 g (without battery and electrodes)
  • power supply: lithium battery CR2 3V
  • battery life: 6 months in standby mode
  • adjustable neck circumference: 18 to 70 cm
  • waterproof , reliable in any mode (the dog can swim with a collar)
  • the intensity of the stimulation pulse can be set on the collar in eight levels
  • ISIT function allows to detect the occurrence and intensity of interfering signals in places where you plan to install the antenna wire and thus prevent possible problems with the proper functioning of the d-fence device

Installation length - recommended wire cross section:

  • up to 400 m - 0.75 mm
  • 400 m - 600 m - 1 mm
  • 600 m - 900 m - 1.5 mm
  • 900 m - 1200 m - 2.5 mm (for model D-fence 1001)
  • 900 m - 2200 m - 2.5 mm (for model D-fence 202)


You might also be interested in (information from our blog):


Read our customers' experiences with this collar (information from our blog):

Návod k použití - D-fence 202 / 2002 1.04 MB Download file

Color: Black

Proč chtít produkty Dogtrace?

Protože jsou

Od základu české

Česká firma. Čeští zaměstnanci. Česká výroba.
Dogtrace je ryze česká firma, vybavená špičkovou technikou.
Nemají žádnou továrnu v Číně ani v jiné zemi.
Veškeré klíčové výrobní procesy probíhají v Lanškrouně a to pod přísnou výstupní kontrolou.


S prodlouženou zárukou

Našim výrobkům naprosto důvěřujeme!
Přísná kontrola a inovace technologických a výrobních procesů zvyšuje úroveň kvality našich výrobků.
Proto jsme se rozhodli prodloužit záruční dobu na 3 roky. 

Více informací naleznete ZDE